Follow the company. Check the evidence.
Public records connected to stocks traded by Congress. See what changed, when it became public, and the original source.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-8, 737-9, and 737-8200 airplanes. This AD was prompted by reports indicating cracks in the bear strap and stub frame at the forward galley door cutout. This AD requires inspections for existing repairs; an inspection for any crack of the fuselage skin, bear strap, and stub frame; repetitive inspections for any crack of the bear strap and stub frame; and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 767-300F series airplanes. This AD was prompted by a report of a supplier notice of escapement documenting that some titanium cargo track crown fittings had suspect material certifications. This AD requires an X-ray fluorescence (XRF) spectrometer inspection to identify the material composition of the cargo track crown fittings or replacement of all cargo track crown fittings with new cargo track crown fittings, and applicable on- condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pratt & Whitney Division Engines
The FAA is adopting a new airworthiness directive (AD) for certain Pratt & Whitney Division (PW) Model PW4074D, PW4077D, PW4084D, PW4090, and PW4090-3 engines. This AD was prompted by the discovery of a quality escape involving incorrect shot peening on certain high- pressure compressor (HPC) drum rotor disk assemblies. This AD requires visually inspecting the HPC drum rotor disk assembly for incorrect shot peen coverage and, depending on the results of the inspection, replacing the HPC drum rotor disk assembly with a part eligible for installation. This AD also requires removing and replacing certain HPC drum rotor disk assemblies before reaching certain life limits. The FAA is issuing this AD to address the unsafe condition on these products.
Arms Sales Notification; Correction
The DoD is publishing the corrected unclassified text of an arms sales notification.
Public: Sep 2, 2026Original source ↗Arms Sales Notification
The DoD (referred to herein as "the Department," "Department of War" or "DoW") is publishing the unclassified text of an arms sales notification.
Public: Aug 28, 2026Original source ↗Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by a Boeing investigation for manufacturing errors and excessive preload forces at the lower side of body (SOB) splice plates common to the lower outboard wing skins. That investigation concluded that shim gaps may have exceeded engineering allowances, and high pull up forces on the components may cause fatigue cracks to form at the fastener holes. This AD requires, depending on configuration, repetitive ultrasonic (UT) inspections at certain splice plates, rear spar terminal fittings, lower chords, front spar terminal fittings, and jack pads for any cracks; repetitive detailed inspections (DET) of certain splice plates for any cracks; and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 787-8 airplanes. This proposed AD was prompted by a report that large forward cargo door (LFCD) split frames may have been manufactured with a material that did not conform to type design. This proposed AD would require an inspection of the LFCD split frames for affected batch numbers and applicable on- condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Public: Aug 20, 2026Original source ↗Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737 -300, -400, and -500 series airplanes. This proposed AD was prompted by reports of nuisance stick shaker activation while accelerating to cruise speed at the top of a climb due to frozen angle of airflow (AOA) sensor vanes. This proposed AD would require installing new external case heaters (ECHs) on the left and right AOA sensors, performing repetitive functional tests and applicable corrective actions, and accomplishing applicable concurrent actions. The FAA is proposing this AD to address the unsafe condition on these products.
Public: Aug 18, 2026Original source ↗Airworthiness Directives; The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2018-11- 14, which applied to certain The Boeing Company Model 767-300 and -300F series airplanes with certain winglets installed. AD 2018-11-14 required high frequency eddy current (HFEC) inspections for cracking of the lower outboard wing skin and repair or modification if necessary. AD 2018-11-14 also required one of three follow-on actions: Repeating the HFEC inspections; modifying certain internal stringers and oversizing and plugging the existing fastener holes of the lower wing; or modifying the external doubler/tripler and doing repetitive post- modification inspections. This AD was prompted by reports of fatigue cracking in the lower outboard wing skin at the inboard fastener of stringer L-9.5, and the lower outboard wing skin of stringer L-6.5, on airplanes with winglets installed per Supplemental Type Certificate (STC) ST01920SE. This AD was also prompted by a determination that, for certain airplanes, the area of the lower wing skin in the vicinity of the critical inboard end fasteners of installed repair doublers must be inspected. This AD continues to require the actions in AD 2018-11-14, adds to the applicability airplanes that have had STC ST01920SE installed and the STC winglets removed, and, for certain airplanes, requires repetitive internal and external HFEC inspections of the lower outboard wing skin common to the external doubler repair at stringer L- 9.5 and repair if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2022-15-01, which applies to certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. AD 2022-15-01 requires inspecting certain vertical fin tension bolt holes; reviewing the bolt sealant application installation procedure in the existing maintenance or inspection program, as applicable; checking maintenance records to determine the replacement status of vertical fin tension bolts; and doing applicable on-condition actions. Since the FAA issued AD 2022-15-01, the FAA has determined that optional sealant types allowed by that AD may not provide sufficient time to complete all bolt installations. The FAA has also received additional reports of corrosion that, in some cases, was more severe than expected. As a result, the FAA has determined that the compliance times for certain actions must be reduced. This proposed AD would, for certain airplanes, continue to require certain actions required by AD 2022-15-01 with reduced compliance times. For certain airplanes, this proposed AD would also require reviewing maintenance records to determine whether a correct sealant application method was used and performing applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Public: Aug 12, 2026Original source ↗Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This proposed AD was prompted by a report indicating that the protection system on the left fan cowl of the right engine does not sufficiently cover the components and systems from possible cross engine debris. This proposed AD would require performing a maintenance records check or inspection of the right engine to determine the part number of the left fan cowl and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Public: Aug 7, 2026Original source ↗Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-8, 737-9, and 737-8200 airplanes. This AD was prompted by reports of cracks in the bear strap at the forward upper corner of the forward galley door cutout. This AD requires an inspection of the fuselage skin for existing repairs and applicable on- condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Hazardous Materials: Notice of Applications for Modification to Special Permits
In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations, notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein.
Public: Aug 6, 2026Original source ↗Requirements for Interference-Tolerant Radio Altimeter Systems
In July 2025, President Trump signed the One Big Beautiful Bill Act. Section 40002 of that law re-institutes the Federal Communications Commission's general auction authority and specifically directs the Commission to complete a system of competitive bidding for not less than 100 megahertz in the 3.98-4.2 gigahertz band (Upper C- band). This final rule supports the Federal Communications Commission's July 2026 Report and Order that makes 160 megahertz of the Upper C-band available for terrestrial wireless flexible use via a system of competitive bidding. To ensure safe, efficient, and reliable aviation operations in the presence of wireless signals in the C-band, the Federal Aviation Administration is issuing new regulations that require all radio altimeters to meet specific minimum performance requirements. These new radio altimeters must withstand interference from wireless signals in neighboring spectrum bands and continue to provide accurate altitude readings to both pilots and integrated aircraft safety systems. These regulations require all aircraft equipped with radio altimeters operating under part 121 and those aircraft with radio altimeters operating under part 129 with 30 or more passenger seats or a payload capacity of more than 7,500 pounds to comply with the minimum performance requirements by December 30, 2030, which is prior to the date the Federal Communications Commission authorizes the use of the Upper C-band for new wireless services, as stated in its Report and Order. All other aircraft equipped with radio altimeters that are required to comply with part 91, including aircraft operating under parts 125, 133, 135, 136, 137, 194, and all other aircraft operating under part 129 that are not subject to the initial deadline, must comply with the same minimum performance requirements on or before October 31, 2034.
Perchloroethylene (PCE) and Carbon Tetrachloride (CTC); Regulation under the Toxic Substances Control Act (TSCA); Compliance Date Extensions
The U.S. Environmental Protection Agency (EPA or Agency) is finalizing an extension of certain compliance dates applicable to certain entities subject to the risk-management rules for perchloroethylene (PCE) and carbon tetrachloride (CTC) under the Toxic Substances Control Act (TSCA). EPA is extending certain Workplace Chemical Protection Program (WCPP) compliance dates for non-federal owners and operators to match the existing compliance dates for federal agencies and their contractors. For both PCE and CTC, this action extends the compliance date for initial monitoring for inhalation exposure to June 21, 2027, and extends the compliance date to meet the existing chemical exposure limit (ECEL), establish a regulated area, institute a workplace information and training program, provide any required respiratory personal protective equipment (PPE), and establish a respiratory PPE program to September 20, 2027. For PCE, EPA is also extending the compliance date for federal entities to institute a workplace information and training program to September 20, 2027, and for non-federal entities to establish and implement an exposure control plan to December 20, 2027.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2024-19- 14, which applied to certain The Boeing Company Model 777-200, 777- 200LR, 777-300ER, and 777F series airplanes. AD 2024-19-14 required repetitive inspections and bond resistance measurement of the bonding jumpers on the first fuel feed tube installed immediately forward of the wing front spar at the left and right main fuel tank penetrations and applicable corrective actions. This AD was prompted by a determination that additional inspections are required to address the unsafe condition. This AD requires repetitive detailed inspections (DETs), repetitive bond resistance measurement, and applicable on- condition actions. This AD also expands the applicability and requires revising the existing maintenance or inspection program, as applicable, to incorporate a certain airworthiness limitation. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737-8, 737-9, and 737-8200 airplanes. This proposed AD was prompted by a report that certain passenger seat assemblies were not correctly installed in the seat tracks. This proposed AD would require a detailed inspection of the seat track fittings of each left and right side track-mounted passenger seat assembly for correct installation and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Public: Jul 27, 2026Original source ↗Airworthiness Directives; General Electric Company Engines
The FAA is adopting a new airworthiness directive (AD) for certain General Electric Company (GE) Model GEnx-1B64, GEnx-1B64/P1, GEnx-1B64/P2, GEnx-1B67, GEnx-1B67/P1, GEnx-1B67/P2, GEnx-1B70, GEnx- 1B70/75/P1, GEnx-1B70/75/P2, GEnx-1B70/P1, GEnx-1B70/P2, GEnx-1B70C/P1, GEnx-1B70C/P2, GEnx-1B74/75/P1, GEnx-1B74/75/P2, GEnx-1B76/P2, GEnx- 1B76A/P2, GEnx-2B67, GEnx-2B67B, and GEnx-2B67/P engines. This AD was prompted by a report of a fuel leak caused by a defective fuel tube hose connecting the main fuel-oil heat exchanger. This AD requires removal of all affected fuel tube hoses from service and replacement with parts eligible for installation. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2026-13- 05, which applied to all The Boeing Company Model 737-8, 737-9, and 737-8200 airplanes. AD 2026-13-05 required revising the existing airplane flight manual (AFM) to provide the flightcrew with operating procedures (non-normal checklists) if a certain circuit breaker in the standby power control unit (SPCU) trips or certain environmental control system (ECS) circuit breakers downstream of the SPCU trip. Since the FAA issued AD 2026-13-05, a formatting error that omitted part of a certain appendix from AD 2026-13-05 was discovered. This AD retains the certain requirements of AD 2026-13-05 and requires revising the existing AFM to include the corrected appendix. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2023-07-09, which applies to certain The Boeing Company Model 747-400 and -8 series airplanes. AD 2023-07-09 requires inspecting for wear of the transfer pump housing inlet check valves and transfer pump motor impeller inlet adapters for the horizontal stabilizer fuel tank and doing corrective actions, if necessary, and limits the installation of affected parts. Since the FAA issued AD 2023-07-09, the manufacturer has developed further action to address the unsafe condition. This proposed AD would require repetitive inspections for damage of the transfer pump housing inlet check valves and transfer pump motor impeller inlet adapters for the horizontal stabilizer fuel tank and applicable on-condition actions. This proposed AD would also limit the installation of affected parts under certain conditions. The FAA is proposing this AD to address the unsafe condition on these products.
Public: Jul 9, 2026Original source ↗Self-Regulatory Organizations; NYSE American LLC; Notice of Filing of a Proposed Rule Change To Amend Rule 903G and 906G
A Notice notice explicitly mentions the company. Read the cited text for its role.
Public: Jul 7, 2026Original source ↗Self-Regulatory Organizations; NYSE Arca, Inc.; Notice of Filing of a Proposed Rule Change To Amend Rules 5.32-O and 5.35-O
A Notice notice explicitly mentions the company. Read the cited text for its role.
Public: Jul 7, 2026Original source ↗Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-8F series airplanes. This AD was prompted by reports of cracking in stringers and splice fittings located at stringer splices at multiple body stations. This AD requires an inspection of each free flange of the stringers at the stringer splice for radius fillers at certain fastener locations, an inspection for cracking of the stringers and stringer splice fittings at certain stringer splice locations, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by reports of door assist handles pulled loose from their lower attach point in the doorway support bracket during pre-flight checks. This AD requires, for certain airplanes, installing a new retainer above the lower keyway of the support bracket assembly and installing a placard on certain support bracket assemblies or marking the part, and for certain airplanes, requires an inspection of the forward and aft door assist handles and applicable on-condition actions. For certain other airplanes, this AD requires installing a new retainer above the lower keyway of the support bracket assembly at certain locations and reidentifying the support bracket assembly. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2026-04- 05, which applied to all The Boeing Company Model 737-8, 737-9, and 737-8200 airplanes. AD 2026-04-05 required revising the existing airplane flight manual (AFM) to provide the flightcrew with operating procedures (non-normal checklists) if a certain circuit breaker in the standby power control unit (SPCU) trips. Since the FAA issued AD 2026- 04-05, the FAA has determined that additional revisions to the AFM are necessary to address certain environmental control system (ECS) circuit breakers downstream of the SPCU that could also trip. This AD retains the requirements of AD 2026-04-05 and requires revising the existing AFM to provide the flightcrew with operating procedures (non-normal checklists) if certain ECS circuit breakers trip. The FAA is issuing this AD to address the unsafe condition on these products.
Connections describe public records, not evidence of wrongdoing or a prediction of returns. Event dates can precede publication by days or months. When a source has no public-release timestamp, we show when we first observed it.
Source coverage
Coverage is growing across companies already tracked here. A scan can return no matching records. This feed is not a complete record of every filing or agency action.
- SEC EDGAR
- Partial coverage — some requests unavailable455 of 455 companies scanned in the past 12 hoursLatest successful company scan: Nov 8, 2026, 11:46 PM EST
- USAspending
- Partial coverage — some requests unavailable285 of 495 companies scanned in the past 12 hoursLatest successful company scan: Nov 8, 2026, 11:48 PM EST
- SAM.gov
- Not connected
- Lobbying disclosures
- Partial coverage — some requests unavailable75 of 495 companies scanned in the past 12 hoursLatest successful company scan: Nov 8, 2026, 11:29 PM EST
- Congress.gov
- Current across tracked companies2 of 2 companies scanned in the past 12 hoursLatest successful company scan: Nov 8, 2026, 11:17 PM EST
- Federal Register
- Partial coverage — some requests unavailable387 of 495 companies scanned in the past 12 hoursLatest successful company scan: Nov 8, 2026, 11:49 PM EST
- Regulations.gov
- Partial coverage — some requests unavailable24 of 51 companies scanned in the past 12 hoursLatest successful company scan: Nov 8, 2026, 11:49 PM EST
- FEC campaign finance
- Stale — refresh overdue264 of 495 companies scanned in the past 12 hoursLatest successful company scan: Nov 8, 2026, 11:49 PM EST