ShadowBuys

Federal Register · Regulatory notice

Airworthiness Directives; The Boeing Company Airplanes

The FAA is superseding Airworthiness Directive (AD) 2023-07- 09, which applied to certain The Boeing Company Model 747-400 and -8 series airplanes. AD 2023-07-09 required inspecting for wear of the transfer pump housing inlet check valves and transfer pump motor impeller inlet adapters for the horizontal stabilizer fuel tank and doing corrective actions, if necessary, and limited the installation of affected parts. This AD was prompted by the manufacturer developing further action to address the unsafe condition. This AD requires repetitive inspections for damage of the transfer pump housing inlet check valves and transfer pump motor impeller inlet adapters for the horizontal stabilizer fuel tank and applicable on-condition actions. This AD also limits the installation of affected parts under certain conditions. The FAA is issuing this AD to address the unsafe condition on these products.

Follow BA
Became public
Nov 2, 2026
Event / period date
Dec 7, 2026
Collected
Nov 8, 2026, 7:44 PM EST

Why this is connected

The source explicitly mentions BOEING CO. A mention alone does not establish a financial benefit.

Source evidence

Read the source excerpt or record
2026-22317] ----------------------------------------------------------------------- DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2026-7215; Project Identifier AD-2025-01558-T; Amendment 39-23506; AD 2026-22-04] RIN 2120-AA64 Airworthiness Directives; The Boeing Company Airplanes AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule. ----------------------------------------------------------------------- SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2023-07- 09, which applied to certain The Boeing Company Model 747-400 and -8 series airplanes. AD 2023-07-09 required inspecting for wear of the transfer pump housing inlet check valves and transfer pump motor impeller inlet adapters for the horizontal stabilizer fuel tank and doing corrective actions, if necessary, and limited the installation of affected parts. This AD was prompted by the manufacturer developing further action to address the unsafe condition. This AD requires repetitive inspections for damage of the transfer pump housing inlet check valves and transfer pump motor impeller inlet adapters for the horizontal stabilizer fuel tank and applicable on-condition actions. This AD also limits the installation of affected parts under certain conditions. The FAA is issuing this AD to address the unsafe condition on these products. DATES: This AD is 

Congressional trading in BA

These disclosures provide context. Their presence does not establish a link between a trader and the event.

Original documents control. Public records can be amended, and company connections may require interpretation. Nothing here is investment advice.